Amflow PL Carbon (800Wh)

To pre-order & secure your bike contact: 

Info@electricbikesplus.co.nz

The Amflow PL Carbon with DJI Avinox drive offers uncompromising power packed into a lightweight carbon E-MTB. Reach top speed on the trail and experience maximum power of up to 120 Nm uphill. The Avinox DJI motor works with a large number of sensors and state-of-the-art software. This enables uniquely dynamic riding behaviour and perfect support in every situation. With tried-and-tested MTB components from FOX, SRAM and Magura, the Amflow PL Carbon offers unadulterated mountain bike fun.

⚙️ DJI Avinox M1 Drive System

Quiet Power, Seamless Control
At the heart of the Amflow PL Carbon Pro is the DJI Avinox M1 mid-drive motor. Built by the same team behind DJI’s world-leading drones and stabilizers, the Avinox system delivers incredible torque with smooth, responsive assistance.

• 105 Nm continuous torque for confident climbing

• 850W continuous power, with 1,000W Boost mode for steep trail sections

• Boost Mode: Tap into 120 Nm of torque for instant acceleration

• Advanced sensor array detects rider input, cadence, and terrain

• Auto Mode: Adaptive assistance that adjusts in real-time — no mode switching required

The internal compound planetary gearset offers unmatched power-to-weight efficiency, while smart noise-dampening design keeps the ride whisper quiet, even under load.

🔋 High-Capacity DJI Battery with Fast Charging

Trail Range Meets Charging Speed
Choose between an 800 Wh or 600 Wh DJI Intube battery, both seamlessly integrated into the carbon frame for low center of gravity and clean aesthetics. Paired with DJI’s 12A GaN charger, you're never off the trail for long:

• 0–75% charge in just 1.5 hours

• Battery health management system for extended lifespan

• Lightweight battery design at only 2.87 kg

• 500 full cycles with at least 80% capacity retention

🧠 Smart Connectivity & Ride Intelligence

Your Ride, Fully Connected
Every Amflow PL Carbon Pro comes with DJI’s Control Display — a sleek 2" OLED color touchscreen built into the top tube. It’s your command center for power modes, ride data, and security.

• Full ride stats: speed, torque, cadence, gradient, calories burned & more

• Wireless syncing with the DJI Avinox app & Strava integration

• Anti-theft features: motion alerts, alarm, GPS tracking, phone unlock

• Dual wireless controllers for assist mode switching without distraction

Amflow PL Carbon

• Lightweight carbon E-MTB
• DJI Avinox motor - 105 Nm continuous power
• 800 Wh DJI Avinox Intube battery
• DJI Avinox 12 A quick charger
• Boost mode with 120 Nm & 1,000 W support
• Fox Performance suspension 160/150 mm
  
  

Amflow PL Carbon (800Wh)

Frame

• Amflow PL Carbon Frame

• Satin Silver

• 150mm rear travel

• Compatible with 27.5" and 29" rear wheels

E-Bike System

• Avinox M1 Drive Unit: 105 N·m

• Avinox Screen: 2-inch OLED Control Display

• Avinox Integrated Battery: 800Wh

• Avinox Wireless Controllers: Right and left sides

• Avinox Fast Charger: 12A/508W

Rear Shock

• FOX Float Performance

• Trunnion (185×55mm), custom tune, EVOL Air sleeve, 2-position lever

Fork

• FOX 36 Performance

• 160mm travel, GRIP Damper, 15×110mm, 44mm rake

Transmission

• Rear Derailleur: SRAM GX Eagle 12-speed

• Chainring: SRAM Eagle Transmission E-MTB Chainring 104BCD 34T

• Shift Levers: SRAM GX Eagle Trigger Shifter｜Single Click

• Cassette: SRAM PG-1230, 11-50T

• Chain: SRAM NX Eagle

• Crankset: DJI Avinox SL Crank (M/L: 155mm; XL/XXL: 160mm)

Brakes

• Magura MT5 hydraulic disc brake

• HC lever, 4-piston caliper w/ Shiftmix 3

• 203mm MDR-C Rotor (front and rear)

Wheels

• Amflow HMA-30

• Rims: Alloy, 29'', 30mm internal width, 32H, tubeless ready

• Spokes: SAPIM E-Light J-bend

• Front Hub: Alloy, 15×110mm thru-axle, 32h, 6-bolt

• Rear Hub: Alloy, 148×12mm thru-axle, 32h, 6-bolt, 21T

Tires

• Front: Maxxis Assegai MaxxTerra 29×2.5" WT 3C EXO E-25 TLR

• Rear: Maxxis Dissector MaxxTerra 29×2.4" WT 3C EXO+ E-25 TLR

Cockpit

• Handlebar: Amflow Enduro Alloy Handlebar, 35mm rise, 800mm wide

• 5° upsweep, 9° backsweep

• Grips: Amflow Enduro Grips

• Stem: Amflow Enduro Stem, One-piece CNC, 35mm length, 35mm clamp

Saddle & Seatpost

• Saddle: Selle Royal SRX Plus

• Seatpost: KS Rage-i

  • M: 150mm

  • L: 170mm

  • XL/XXL: 190mm

Accessories

• Quick Start Guide

• Torque Wrench (3~25 N·m, Hex 2/3/4/5/6mm, Torx® 25)

• Shock Pump

• Front and Rear Lights